Refrigerated truck, Freshness Mobile T5

Product Description and Features
GRP interior lining including insulation for fresh produce and refrigerated section integrated transport refrigeration – fuel-saving, unchanged vehicle height. The modular system fully meets the EU Hygiene Package and regulations pursuant to ATP, HACCP and respective DIN regulations.
Loading area dimensions:
Wheel base 3000 mm, FD: L 2210mm x W 1620mm x H 1200mm, 53 E2-boxes
Wheel base 3000 mm, MHD: L 2210mm x W 1620mm x H 1420mm, 60 E2-boxes
Wheel base 3400 mm, FD: L 2610mm x W 1620mm x H 1200mm, 63 E2-boxes
Wheel base 3400 mm, MHD: L 2610mm x W 1620mm x H 1420mm, 70 E2-boxes
Wheel base 3400 mm, HD: L 2610mm x W 1620mm x H 1700mm, 77 E2-boxes

- The flexible modular system enables maximum interior loading room dimensions with optimum residual load capacity.
- The plumb-vertical front wall guarantees 100 % stacking potential.
- serial reinforced chassis in floor and wall sections,
- top-quality, recyclable CFC-free hard foams and recyclable, mineral non-combustible insulating material
- Hard foam material with maximum WLG classification
- industrially produced, shock-resistant GRP material with food safe gel coating
- non-porous, completely smooth surface in colour similar to RAL 9010
- adhesive and joint material used is permanent, fungus-resistant
- All sections involved with loading – e.g. floor border at the side and rear as well as wheel cases – are serially provided with edge guards.
- The individual segments are combined to a watertight and high-pressure cleaner resistant loading area via multiple adhesion. Front and side walls are smooth and are not interrupted by partial coverings.
- Replacement of the lining elements for the main components is possible (accident).

- Auxiliary cooling with external socket (230 V / 400 V)
- Air-conditioning in driver’s cab
- Multi-chamber additions
- 2in1-additions
- Case additions
- Deep-freeze additions

- Caddy Freshness Mobile
- Crafter Freshness Mobile (all wheel bases, all roof variants)

Accessories
Accessories
Ventilation systems
Floor drainage
Ceiling lights
refrigerating curtains
Flap racks
Loading lift
Loading room floor surfaces such as non-slip mats, sanding, aluminium ripples, V2A
Load security such as lashing strips, telescopic rods
Rack installations
Tubular track systems
Sockets 12V-on board power supply
Temperature recording
Additional heating
additional dividing walls
False floors

Typ: Volkswagen van
1.9-l-TDI®-engine (62 kW), 1.9-l-TDI®-engine (75 kW),
2.5-l-TDI®-engine (96 and 128 kW) with front-wheel drive or 4MOTION®, manual transmission or automatic transmission
2.0 l Otto, 85 kW
all wheel bases, all roof variants
with or without air-conditioning

no 2./reinforced battery and generator required

Electrical interface
Cooling agent compressor (depending on a factory-provided air-conditioning unit)
factory-provided diving wall