Lightweight construction trunk body building

Body building measurements:
Wheel base 3.665 mm/Length in longitudinal section 3.500 mm x width in longitudinal section 2.090 mm x height in longitudinal section 2.080 mm
Wheel base 4.325 mm/Length in longitudinal section 4.350 mm x width in longitudinal section 2.090 mm x height in longitudinal section 2.080 mm

Body building:
Trunk body building in combined construction out of glass fibre reinforced plastic lightweight construction walls, roof with 1 light-band and light metal border profile; roof frame profile, front corner posts and floor frame out of light metal; side walls and front wall manufactured in the sandwich procedure with polyurethane foam insulating core; inner and outer top coat out of glass fibre reinforced plastic; wall thickness ca. 25 mm

Substructure:
Floor group in structural steelwork with side members and cross members in accordance with body building guidelines

Floor:
Shipping space floor out waterproof glue laminated plywood; laminated on both sides with phenolic resin; continuous without wheel cases; floor thickness 16.5 mm
Socket:
1.5 mm galvanised sheet steel, 85 mm high

Rear portal with doors:
Rear wall portal in lightweight construction out of aluminium and steel profiles; rear wall double doors; 1 handle as access assistance; two-staged extending step under the right door wing

- 3D driver's cab roof spoiler
- Night parking signs
- Front wall skirting protection 1.250 mm high
- Load-securing strap with hooks for lashing bracket
- Paintwork colour in driver's cab, non-metallic
- Paintwork colour in driver's cab, metallic
- One-winged sidewall right, 900 mm wide
- Plastic toolbox (measurements 750x350x360 mm)
- Inserted lashing brackets, height 900/1.400 mm
- lashing brackets *width reduction in longitudinal section about circa 40 mm
- Ratch for lashing brackets
- Fire extinguisher 2 kg, mounted in the driver's cab

Roller shutter:
Sliding shutter portal with roller shutter *Attention! Clear portal width is reduced to 1.970 and the clear portal height/bodybuilding height to 1.870 mm

Tail lift:
Manufacture: Sörensen, Bär, Dautel, lifting capacity 750 kg; aluminium platform; platform height 1.600 mm; top tailgate above; turnover protection, alteration of the rear lighting

VW Crafter 3.5 tons, wheel base 3.665 mm/4.325 mm

Required minimum configuration:
front axle stabilizer (recommended); rear axle stabilizer (recommended); rear underride guard (standard in 3.5 ton chassis, optional in 5,0 ton chassis); mirror holder for vehicle widths 2.170 to 2.300 mm; marking lights at the sides; contour lights on the driver's cab roof; electrical system for bodybuilding interior lighting; spare wheel holder under frame end (not for LBW i.V. with spherical-head coupler); spare wheel (recommended); 1 wheel chock only for vehicles > 3.5 tons allowed total weight

Additional configuration for tail lift:
Omission of EG rear underride guard (standard in 3.5 ton chassis, optional in 5,0 ton chassis); rear axle stabilizer or strengthened rear axle stabilizer; pre-equipped electrical circumference for tail lift; strengthened battery additional; separated relay by batteries additional; extended rear lamp line; generator 14V/180A; end cross member screwed and shortened (in 3.0 ton to 3.5 t. chassis)

Note: The end cross member is shortened as standard delivery contents in 5.0 ton chassis. End cross member is not shortened for VW. Must be ABH delivery contents ABH.