Refrigerated vehicle, fresh products bodybuilding

VW Crafter 3.5 ton chassis
Body building measurements:
Wheel base 3.665 mm/Length in longitudinal section 3.270 mm x width in longitudinal section 1.950 mm x height in longitudinal section 1.870 mm

VW Crafter 5.0 ton chassis
Bodybuilding measurements:
Wheel base 3.665 mm/Length in longitudinal section 3.550 mm x width in longitudinal section 2.050 mm x height in longitudinal section 2.020 mm
Wheel base 4.325 mm/Length in longitudinal section 4.360 mm x width in longitudinal section 2.050 mm x height in longitudinal section 2.020 mm

Bodybuilding: sandwich construction with glass fibre reinforced plastic topset beds as well as CFC-free polyurethane foam core;
Elements entirely bordered with glass fibre reinforced plastic and aluminium profiles
Substructure: floor group in rivet construction with side members and cross members for self-supporting floor
Floor:
Self-supporting insulating sandwich floor; noiseless non-skid floor surface

Base protecting rib:
At both side walls and the front wall, circa 250 mm high out of aluminium, circa 4 mm protraction

Wall thickness:
Floor circa 62 mm
Side wall circa 25 mm
Front wall / roof circa 40 mm
Rear wall doors ca. 25 mm

Front wall:
Front wall reinforcement without installation opening for cooling appliances from Thermo King, Carrier or Konvekta

Rear portal with rear wall doors:
Rear wall portal out of blank stainless steel, double-winged rear wall doors with triple special sealing; Door wings entirely pivotable and securable to the side walls; 3 pair rear wall hinges and a pair of protracting locking gears out of blank stainless steel; 1 extendable ascension ladder at the back right; 1 handle as access assistance

Electrical systems:
2 bright interior lights embedded in the roof and connected to the pre-equipped switch in the driver's cab. The original motor vehicle rear lighting will be adjusted to the corresponding body building lengths.

Cooling appliance:
Cooling device for fresh product manufacturers Carrier, Thermo King and Konvekta
Technical data should be taken from the enclosed data sheets.

Equipment:
2 rubber bumpers
Paintwork:
One-coloured body building in pure white RAL 9010, galvanised substructure
Technical acceptance:
TÜV acceptance, ALB alignment, tachograph inspection in accordance with § 57b > 3.5 tons

- 3D driver's cab roof spoiler
- Night parking signs
- Front wall skirting protection 1.250 mm, high
- Load-securing strap with hooks for lashing brackets
- Paintwork colour in driver's cab, non-metallic
- Paintwork colour in driver's cab, metallic
- One-winged sidewall right, 900 mm wide
- Plastic toolbox (measurements 750x350x360 mm)
- Inserted lashing brackets, height 900/1.400 mm
- Lashing brackets *width reduction in longitudinal section about circa 40 mm
- Ratch for lashing brackets
- Replacement wheel storage
- Fire extinguisher 2 kg, mounted in the driver's cab

Tail lift:
Sörensen, Bär, Dautel; lifting capacity 750 kg; aluminium platform; platform height 1.600 mm top tailgate above; double-sided turnover protection; tail lift switch in the driver's cab only for vehicles over 4.6 tons

VW Crafter 3.5 tons /5.0 ton chassis, wheel base 3.665 mm/4.325 mm

Required minimum configuration:
front axle stabilizer (recommended); rear axle stabilizer (recommended); rear underride guard (standard in 3.5 ton chassis, optional in 5,0 ton chassis); mirror holder for vehicle widths 2.170 to 2.300 mm; marking lights on the sides; contour lights on the driver's cab roof; electrical system for bodybuilding interior lighting; spare wheel holder under frame ends (not for LBW i.V. with spherical-head coupler); spare wheel (recommended); wheel chock only for vehicles > allowed 3.5 tons total weight

Additional configuration for tail lift:
Omission of EG rear underride guard (standard in 3.5 ton chassis, optional in 5,0 ton chassis); rear axle stabilizer or strengthened rear axle stabilizer; pre-equipped electrical circumference for tail lift; strengthened battery additional; separated relay by batteries additional; extended rear lamp line; generator 14V/180A; end cross member screwed and shortened (in 3.0 ton to 3.5 t. chassis)

Note: The end cross member is shortened as standard delivery contents in 5.0 ton chassis. End cross member is not shortened for VW. Must be ABH delivery contents ABH.