Plywood trunk body building

VW Crafter 3.5 ton chassis
Body building measurements:
Wheel base 3.665 mm/Length in longitudinal section 3.500 mm x width in longitudinal section 2.110 mm x height in longitudinal section 2.075 mm
Wheel base 4.325 mm/Length in longitudinal section 4.350 mm x width in longitudinal section 2.110 mm x height in longitudinal section 2.075 mm

VW Crafter 5.0 ton chassis

Body building measurements:
Wheel base 3.665 mm/Length in longitudinal section 3.650 mm x width in longitudinal section 2.270 mm x height in longitudinal section 2.230 mm
Wheel base 4.325 mm/Length in longitudinal section 4.350 mm x width in longitudinal section 2.270 mm x height in longitudinal section 2.230 mm

Plywood bodybuilding:
In combined construction out of light metal und glass fibre reinforced plastic-laminated plywood; 1 light band in the roof

Substructure:
Floor group in structural steelwork with side members and cross members in accordance with bodybuilding guidelines

Floor:
Shipping space floor out of waterproof glue laminated plywood; laminated on both sides with phenolic resin; floor thickness 20 mm

Socket:
At the side walls, circa. 200 mm high made of galvanised steel sheet steel

Rear portal with doors:
Rear wall portal in steel profile, rear wall double doors, 1 handle as access assistance, two-staged extending step under the right door wing

Electrical system:
Bright interior lighting as a spotlight in the rear portal; installation of side marking lights

Equipment:
2 plastic rear mudguards with dirt traps; bumper buffer devices, in vehicles > 3.5 tons allowed total weight

Colour scheme:
Body building dyed monochrome in white RAL 9010; galvanised substructure, without paintwork

Acceptance:
TÜV acceptance, tachograph inspection in accordance with § 57b to 3.5 tons; with for equipment with spherical-head coupler, above 3.5 tons always

- 3D driver's cab roof spoiler
- Night parking signs
- Front wall skirting protection 1.250 mm, high
- Load-securing strap with hooks for lashing brackets
- Paintwork colour in driver's cab, non-metallic
- Paintwork colour in driver's cab, metallic
- One-winged sidewall right, 900 mm wide
- Plastic toolbox (measurements 750x350x360 mm)
- Inserted lashing brackets, height 900/1.400 mm
- Lashing brackets *width reduction in longitudinal section about circa 40 mm
- Ratch for lashing brackets
- Fire extinguisher 2 kg, mounted in the driver's cab

Roller shutter:
Sliding shutter portal with roller shutter, tail frame opening: Height = height in longitudinal section - 185, width = width in longitudinal section - 180

Tail lift:
Manufacture: Sörensen, Bär, Dautel; lifting capacity 750 kg; aluminium platform; platform height 1.600 mm top tailgate above; turnover protection

VW Crafter 3.5 ton /5.0 ton chassis, wheel base 3.665 mm/4.325 mm

Required minimum configuration:
front axle stabilizer (recommended); rear axle stabilizer (recommended); rear underside guard (standard in 3.5 ton chassis, optional in 5,0 ton chassis); mirror holder for vehicle width 2.170 to 2.300 mm; marking lights on the side; contour lights on the driver's cab roof; electrical system for body building interior lighting; spare wheel holder under frame end (not on the LBW i.V. with spherical-head coupler); spare wheel (recommended); wheel chock 1mal, only for chassis > allowed total weight 3.5 tons

Additional configuration for the tail lift:
Omission of EG rear underride guard (standard in 3.5 ton chassis, optional in 5,0 ton chassis); rear axle stabilizer or strengthened rear axle stabilizer; pre-equipped electrical circumference for tail lift; strengthened battery additional; separated relay by batteries additional; extended rear lamp line; generator 14V/180A; end cross member screwed and shortened (in 3.0 ton to 3.5 t. chassis)

Note: The end cross member is shortened as standard delivery contents in 5.0 ton chassis. End cross member is not shortened for VW. Must be ABH delivery contents ABH.